The HCS04.2E-W0520-N-04-NNBN control drive is built by Bosch Rexroth, a leading manufacturing company of products in relation to automation technology and the development of gears for robotics.
The HCS04.2E-W0520-N-04-NNBN is a version of the HCS04.2E-W0520which is also a version of the HCS04.2E and because of this, the three drives have things in common. What should be noted is that the difference between these three is mainly in the addition of converters. These are added to make the drives more efficient and the addition of externally connected input lines called fuses and cables for coupling with Slave(s) at the DC Bus. These fuses are created to be superfast so that they can switch off both direct voltage and alternating voltage. What this means is that the HCS04.2E-W0520-N-04-NNBN share the same properties originating from the addition of the converter -W0520- to the HCS04.2E drive parts in conjunction with some other benefits.
Thus, the properties of the HCS04.2E-W0520-N-04-NNBNcontrol drive part in the high overload include a pre or conduit fuse of 400.) A, a Cu cable of 2 x (3 x 120) mm2, a Mains fuse converter protection of 400 A sf D and a Lines in control cable of 185 mm2 per phase. The maximum continuous current is 314 A with a maximum connection of M12 and a motor cable line of 2 x (3 x 95) mm2.The pre or conduit fuse is usually in this regard the recommended pre-fuse for direct motor start with bypass circuit. Also, one thing you must note with this drive part is that, if the main fuses are blown, then a primary defect has already occurred inside the converter.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved