The combination of Rexroth motor series and motion drives makes the selection of servo motors and drives easier for different companies in the field of motion systems. These companies can be found in the field of robotics, tracking systems, and automated machines. Servo drives control the functionality of the servo motors to by keeping track of their precise positions in relation to other machine parts. The drive functions and their other combinations can be used for several purposes.
For the HCS02.1E-W0012 model, the size of this design motor is 300 mm in diameter. It shows that it can be connected to a 24 volts supply. The width of the device is 65 mm, theminimum mounting width is 70 mm, and the device height is 290 mm. The device depth is 265 mm, and the dimension Z in the vertical direction of this given model is 70 mm. The maximum current allowed is 12 Amperes. If motor holding brakes are to be supplied, observe the data of the motor documentation. The following values are normally sufficient:
24 ± 5% at motor cable length < 50 m
26 ± 5% at motor cable length > 50 m
Observe additional distance to lateral neighboring devices. X1, L+/L is not available for the HCS02.1E-W0012 model. In addition, X9 is also not available. In this model, the power section connections are left: front and right: bottom.
The control section is a separate component that is plugged into the power section. The drive controller is supplied complete with factory installed (possibly configured) control section. On the basis of these characteristics of the given model, it can be vastly used in different industries for motion control purposes.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved