COVID-19 Update: Wake Industrial is open and available to support your automation needs.
Mechanical engineering has never gotten better than it has recently become with the advancement of automation technology in industries. One of the few things this technology promotes is to promote the ease with which factory workers can now carry out their duties at an environment that is virtually risk free while using products that is modular and can be paired with other parts for better result at a very cost-effective rate and one of the numerous aspects of the robotics aspect of motion technology that cannot be ignored one bit is the drive and control aspect which Bosch Rexroth specializes in.
Bosch Rexroth is a mechanical engineering company with vested interests in building drives for machines that can be used in industries by virtually everyone who works there. These drives are built in such a way that when attached to the machines, they become so fast and agile to a point that is unbelievable. This is a thing that can only be achieved by Bosch Rexroth and its innovations in control technology.
The HCS01.1E-W0018-A-03 in case of mounting and installation has a specified minimum of distance that can be applied for all different types of mounting like the back-side mounting and the left- or right-hand mounting. Furthermore, the device that is being mounted must have an immediate contact with the wall and the tightening torque of the device’s mounting screws should be 6Nm. The HCS01.1E-W0018-A-03 has a rated input current of 5.0 A, an output voltage of 3 x AC 0…500, an output current of 7.6 A and a short circuit current rating of 42000 A rms. The minimum spacing on the top and bottom of the device after mounting should be 90 mm.
|Cooling Mode:||Air, internal (through integrated blower)|
|Maximum Current:||18 A|
|Degree of Protection:||IP 20|
|Mains Connection Voltage:||3 x AC 200 to 500 V + or - 10%|
|Other Design:||Factory Assigned|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved