Product Description

The Rexroth DKS01.2-W100A-DA01-00 is a 100 Amps rated drive controller. It is compatible with MDD series AC motors. The drive is rated for standard noise emission. Configuration designation of the DKS01.2-W100A-DA01-00 is DA01-00. Encoder type available on the drive is DSF. The rated current, peak current and continuous current for the drive are 100 Amps, 100 Amps and 50 Amps respectively. Input rating of the drive is three-phase 230 Volts AC with ±10% tolerance. The supported line frequency range is 50 to 60 Hertz. At maximum loading the drive power requirement is 11 kVA. Voltage on the internal DC bus is 300 Volts DC. The continuous and peak power ratings for power regenerated by the bleeder are 0.5 kilowatts and 18 kilowatts. The maximum power loss excluding bleeder power loss is 480 watts.

Unused DKS01.2-W100A-DA01-00 drives should be kept in an area where they will be protected from vibration, dust and moisture and where the temperature of surrounding air stays between -30 and 85 degrees Celsius. During transit shock absorbing supports should be used to prevent drive damage. The DKS01.2-W100A-DA01-00 is designed for installation inside a control cabinet where it will be protected against intentional penetration and water entry. Maximum relative humidity rating of the drive is F as per DIN 40 040. Heat generated by the drive is dissipated inside the cabinet. Appropriate amount of air flow should be ensured to keep ambient temperature between 5 and 45 degrees Celsius. Beyond 45 degrees Celsius the drive output derates below rated values. The DKS01.2-W100A-DA01-00 drive should be properly grounded before it is put into operation. The DKS01.2-W100A-DA01-00 weighs 11 kilograms and measures 373 x 170 x 260 millimeters. This unit can be shipped globally with a one-year warranty period from Wake Industrial.