Product Description

The DKS01.1-W100A-DL02-00 is a version-1 AC DKS servo drive from Bosch Rexroth Indramat. The design configuration of the DKS01.1-W100A-DL02-00 is DL02, and its approximate mass is 11 kilograms/24.25 lbs. It utilizes the DSF encoder type and compatible with MDD motors. The peak current of the DKS01.1-W100A-DL02-00 is rated 100 amps, and its rated and continuous current are 100 amps and 50 amps respectively. The voltage connection of this servo drive is 3-phased, with an input voltage of 3 x 230V (±10 percent). The DKS01.1-W100A-DL02-00 features an AC servo bleeder with a continuous power rating of 0.5 Watts and a peak power of 18 Watts.

The operating temperature of the DKS01.1-W100A-DL02-00 is within the range +5 ≤ ^oC ≤ +45, and at reduced specifications, the maximum permissible ambient temperature is +55 ^oC. While shipping and storing the DKS01.1-W100A-DL02-00, the admissible temperature range is +30 ≤ ^oC ≤ +85, to avoid overheating and internal condensation under varying climates. When installing and positioning the cooling unit in the housing of the DKS01.1-W100A-DL02-00, its position must be such that condensates do not drop on the drive’s components to avoid damage. For variable temperature cooling units, the recommended temperature limit is 40 degrees. The drive is classified under the insulation class C, as indicated by DIN 570 110.

This DKS01.1-W100A-DL02-00 servo drive is meant to be installed in a closed housing or control cabinet with protection class IP10, as per DIN 40 050 guidelines. The IP 10 categorization means that the DKS01.1-W100A-DL02-00 is shielded from solid penetrations and foreign object with D = 50 mm. It is susceptible to damage from internal penetration and water. This unit can be shipped globally with a one-year warranty period from Wake Industrial.