Product Description

The DKS01.1-W050A-RA01-02-FW is a member of the DKS01 Intelligent Digital Servo Drive Series with integrated Power series manufactured by Indramat Rexroth. It is compatible with a 3-phase connection and a 3-phase power source which it is connected to should be up to 230 V. According to Configuration Table-Cards Blueprints, its Slot U1 supports the DAE 1.1 table card. U2-U4 supports a similar type of Table-Card called COVER while U5 agrees well with DSM 2.1-E11-01.RS.

The DKS01.1-W050A-RA01-02-FW Digital Servo Drive has a cooling system coded W which stands for Warm Type and this translates to heat is dissipation inside the device's cabinet. It has a Standard Noise Emission at Motor. The Motor type runs in tandem with this DKS Servo Drive model, the MDD Motor. Rated current of the Servo Drive is quantified at 100A and peaks at the same. Its Continuous current is the result of slashing the aforementioned value into half, 50A .

The frequency of the device is between 50 and 60 Hz. When the drive is at its maximum loading, it will require power of about 11 kVA. A basic unit can weigh up to 11Kg. Continuous Regenerated Power is in kilowatt at 0,5kW and  Regenerated Power rating is peaked at 18kW. While power losses can occur in both the electrical and power factions of the DKS Servo Drive, it should be chronicled that power loss can also occur in the bleeder. The maximum loss of power while the DKS Servo Drive is loading is 480W when power loss at the bleeder has been subtracted from the gross power loss. Its encoder model is the DSF. PWM is calibrated at 4KHz and it has rare fluctuations and variants. Its internal bus DC Voltage is 300V and the Protection class is IP10 by DIN 40 050 while the Insulation class is C in tandem with DIN 570 110. This unit can be shipped globally with a one-year warranty period from Wake Industrial.