Product Description

The DKS01.1-W050A-DS29-01 servo drive is a modern and one of the most recent innovations Bosch Rexroth. The servo drive is specifically designed to pair with the MDD digital AC servo motor forming a servo drive system. The servo drive controls and monitors the movement, position, and torque output of the MDD digital AC servo motor using the signal it receives from the control center. The drive can be configured to adapt to various industrial applications using special configuration components, which can be inserted into the slots U1 to U5 present on the drive’s housing. The DKS01.1-W050A-DS29-01 servo drive configuration components include a basic servo drive unit, command interface cards, auxiliary plugged-in cards, software module, and a configuration label.

To prevent unwanted power discharge in the DKS01.1-W050A-DS29-01 servo drive, a bleeder resistor which uses a continuous regenerated power of 0.35 kilowatts and a peak regenerated power of 9.4 kilowatts is installed in the drive. Also, an integrated dynamic braking system and an integrated protection system are provided in the servo drive to shut off the power supply to the drive in the case of a sudden power interruption. The servo drive also has a pre-programmed error reaction, which is operated during operational emergencies.

The DKS01.1-W050A-DS29-01 servo drive has a rated current of 50 Amperes. It draws a constant current of 25 Amperes from the mains electricity using its three-phase electrical connector. The servo drive has a PMW frequency of 4 kilohertz. At maximum loading, the servo drive has a power requirement of 9.5kilowatts and loses an estimated power of 305 watts. The DKS01.1-W050A-DS29-01 servo drive is produced following the C per DIN 570 110 insulation class and the IP 10 per DIN 40 050 protection class. This unit can be shipped globally with a one-year warranty period from Wake Industrial.