Product Description

The DKS01.1-W050A-D servo drive from Bosch Rexroth belongs to the DKS product group of drives from the manufacturer. This product comes equipped with an integrated power supply. The device supports a direct connection to a three-phase 230V source. It executes the pre-programmed error reaction when there is a drive, power, or system fault. The unit features an alphanumeric display that assists in user-guided troubleshooting. It has a rated current and a peak current of 50A. The drive can be used in combination with the MDD digital servomotor from the manufacturer to act as a full drive system. The product features five slots for inserting auxiliary plug-in cards in its configured state.

The servo drive has a configuration label that shows the cards installed on it. The digital drive has a PWM frequency of 18kHz. The product faces power losses in both its power and electronics section during operation. This device has a maximum ideal humidity of Class F in adherence with DIN 40 040 specifications. It should be installed inside a closed housing or a control cabinet. The unit is protected against entry of foreign and solid objects with diameters of more than 50mm. The U, V, and W terminals have a maximum cable cross-section of 4mm². The DKS01.1-W050A-D is backed by a one-year warranty.

The signal cables of the product should be routed as far away as possible from each other to prevent interference. The motor power connection and input power connection are located at the bottom of the basic unit. The device has a series code of 1. The unit makes use of a DSF type encoder. It must be connected to a three-phase power supply. The device weighs approximately 11kg. This servo drive can be shipped to any address across the globe. This unit can be shipped globally with a one-year warranty period from Wake Industrial.