Product Description

The manufacturer of this product, Bosch Rexroth, is one of the top manufacturers of automated systems. The DKS01.1-W030B-RA01-01 can be connected to either a 3-phase power source or a single-phase power source of 1 x 230 V AC. It has a dynamic brake system that can slow the drive and halt it, if there is problem in the electronic circuitry of the drive.

The DKS01.1-W030B-RA01-01 weighs approximately 11kg and is quite easy to service. The signal cables are connected through the screw terminals. It is composed of many components such as the basic servo drive unit and configuration label that enables its smooth functioning. It can be controlled via an ANALOG Interface and an Incremental Encoder Emulator that contains control inputs and outputs that enables communication with the controller.

The power requirement of the DKS01.1-W030B-RA01-01 of 4, 5 kVA. It has a reduced noise emission at motor and it uses a current rating of 30A.  The bleeder continuous power of 0.3kW and peak power of 5kW. In the case of a system or drive faults, the drive can perform the programmed error reaction. The DKS01.1-W030B-RA01-01 operates under the ambient temperature of between 5°C and 45°C. The permissible maximum humidity according to humidity class F per DIN 40 040. The cooling units should use a sealed control cabinet to prevent warm humid air from entering it. The temperature of the cooling unit must be set and fixed at 40°C. The air temperature within the enclosure should never be less than the air temperature outside the enclosure. To maintain ambient conditions in enclosures, a cooling unit should be used to cool the air inside the enclosures. This unit can be shipped globally with a one-year warranty period from Wake Industrial.