Product Description

This servo drive manufactured by Bosch Rexroth is very flexible and can be used for many different applications. It is coupled with MDD digital AC servo motors to form a drive system. The DKS01.1-W030B-RA01-00 is connected to a three-phase power source of 230V. It also consists a basic servo drive unit, software module, and configuration model, and other components.

The DKS01.1-W030B-RA01-00 uses a rated current of 30 A with a reduced noise emission at motor. The maximum amount of current it can source over a period is 30 A. It can run efficiently at a frequency of between 50 and 60Hz. The DKS01.1-W030B-RA01-00 uses an ANALOG interface type to connect the drive and the control, with Incremental Encoder Emulator to operate with normal controllers.

The DKS01.1-W030B-RA01-00 is integrated with a protection system that can close the power supply to the drive. The protection system selected may be dependent on the current at the maximum drive load, if fuses are used to connect to the power system. The fuses selected should not be less than 10 A. The type of protection used by this servo drive is IP 10 according to DIN 40 050. This means that objects more than 50 mm in diameter cannot penetrate it. But it is not protective against water or deliberate infiltration. The operating conditions required for the servo drive to performed optimally needs to be implemented, to avoid damage to the drive. The DKS01.1-W030B-RA01-00 should be operated under a cold or dry climate. It should be stored and shipped under the ambient temperature of -30°C to +85°C. The environment that it is stored in should be dry and free from vibration. In a situation where vibrations are unavoidable, use a vibration-dampener. This unit can be shipped globally with a one-year warranty period from Wake Industrial.