Product Description

The DKS01.1-W030B-R is made by the Rexroth Indramat company. The product is a servo drive controller that pairs explicitly with the MDD AC drive motor to form an efficient drive system. Industrial machines that use the DKS01.1-W030B-R  servo drive controller are usually characterized by a high-speed output and a high production rate.

The drive controller can be adjusted to work with a specific industrial machine by inserting special customization components into the slots present on the drive’s housing. These customization components include a basic servo drive unit, a software module, a command interface card, an auxiliary plug-in card, and a configuration label. The drive also contains a bleeder resistor. The DKS01.1-W030B-R drive controller is produced under strict supervision and has been tested before delivery to ensure that it is produced according to the IP 10 per DIN 40 050 protection class and C per DIN 570 110 insulation class. To maintain an optimum temperature inside the drive controller, it may be necessary to use a cooling unit inside the drive enclosure. The drive controller can use a single-phase or three-phase input connection to connect to the mains electricity.

The DKS01.1-W030B-R drive controller works optimally with a continuous current of 15Amperes. It has a rated current of 30 Amperes and uses an input voltage of 1x 230 or 3x 230volts. It uses a power input frequency of 50-60hertz and a PWM frequency of 18Kilohertz. At maximum loading, the drive controller has a power requirement of 4.5Kilovolts-Amperes. The drive should not be operated at an ambient temperature greater than +55 degrees Celsius. Running the drive at an ambient temperature above +55 degrees celsius may cause a mechanical breakdown. This unit can be shipped globally with a one-year warranty period from Wake Industrial.