Product Description

The DKS01.1-W030B-DS45-00-FW is a servo drive controller manufactured by the reputable Rexroth Indramat to pair specifically with the MDD AC servo motor. The pairing of the DKS01.1-W030B-DS45-00-FW and the MDD AC servo motor forms a servo drive system that is extensively used to supply kinetic energy in industrial production processes. This unique servo drive motor connects to the MDD AC motors via a power cable and a motor feedback cable. It uses the power cable to supply power to the motor and the motor feedback cable to exchange signals with the motor. The DKS01.1-W030B-DS45-00-FW is flexible in its operation, and it can work with a broad range of industrial machines.

The DKS01.1-W030B-DS45-00-FW motor has a rated current of 30Amperes. It is produced according to the IP 10 per DIN 40 050 protection class and  C per DIN 570 110 insulation class, making it perfectly safe for industrial applications. The drive controller can be set with a pre-programmed error response with it executes each time it encounters an operational error. The drive controller can use either a three-phase or a single-phase connection to connect to the mains electricity. The drive also has an integrated dynamic braking system, which it uses to stop the current flow to the drive if an expected operational failure occurs.

The DKS01.1-W030B-DS45-00-FW drive controller weighs approximately about 11kilograms and has an internal bus voltage of 300Volts. It uses an input voltage of AC 1 x 230 or 3 x 230Volts depending on the type of connection the drive is installed with. The drive operates optimally with a continuous current of 15Amperes and has a rated power requirement of 4.5kilovolts-Amperes. It has a PMW frequency of 18Kilohertz and uses a power input frequency of 50 to 60 hertz. This unit can be shipped globally with a one-year warranty period from Wake Industrial.