Product Description

The DKS01.1-W030B-DA01-00 drive is a digital servo drive manufactured by Bosch Rexroth. The drive can be connected to a single-phase 230VAC power source. The product has a current rating of 30A. This device supports deceleration and stopping with the help of a dynamic brake system when there is a problem. It has screw terminals for the connection of its signal cables. The unit along with an MDD series AC servo motor acts as a complete drive system. The drive makes use of a DSF type encoder. The configuration label helps to identify the cards installed. The servo drive experiences power loss in both the bleeder as well as the power and electronics sections.

The servo drive is capable of functioning under humid conditions. It has a Class F ambient air humidity according to DIN 40 040 specifications. The unit must be mounted inside a control cabinet and it is not protected against entry of water. The A1, A2, and A3 motor power connection terminals on the device have a maximum cable cross-section of 4mm². The power cables and signal cables of the digital drive must be routed separately from each other to prevent interference. The drive incorporates warm type cooling via heat dissipation inside the control cabinet. The microprocessor-controlled product is backed by a warranty period of one year.

The electrical components of this device feature protection against overloading. However, they may get damaged due to electrostatic discharges. The single-axis positioning card that comes with the product helps in the motion of the drive. The Emergency Stop button of the unit should be positioned within easy access. The device can be connected to a VT-100 terminal or PC at its X2 connector. The servo drive can be shipped to any worldwide address of your choice safely.