Product Description

Bosch Rexroth is extremely concerned about their customer’s satisfaction through their high-quality products such as drive controllers, servo drives, and frequency converters. These products are widely used in different automation industries.

The DKR05.2-W500N-BE12-01-NNNN-FW model is equipped with a built-in blower which helps in maintaining the ambient temperature of the drive controller. The DKR drive controller undergoes the maximum power loss of 2500 W while operating at the continuous current of 210/150 A. The DKR drive controller consists of a basic unit that contains 5 slots for installing different plug-in modules. Slot 1 of the model is equipped with a SERCOS interface for performing efficient communication between the controller, motor, and other I/O modules. A digital servo and resolver feedback is installed in this model for indirect position and speed control. The rated power voltage for this model is 3 × AC 400 – 480 V with ±10% augmentation. The unit operates at a system frequency of 50 – 60 Hz. A serial interface (RS-232/RS-485) is placed in this model that helps in developing communication between the drive controller and a PC. Slot 5 is equipped with a firmware module (ESM 02.3) and it should be ordered separately.

The model DKR05.2-W500N-BE12-01-NNNN-FW comes without a bleeder resistor and it can generate the maximum power of 125 kW while operating at the maximum current of 282 A. The drive controller comes in IP20 protection rating and it should be installed into the switch cabinet of the appropriate protection class. The controller can operate normally, without derating, under the ambient temperature range of +5 o +45 degree Celsius and at the maximum height of 1000 meters above sea level. The model is designed to operate at a rated current of 500 A. The total weight of the unit is approximately 150 kg excluding the weight of accessories and mounting. This unit can be shipped globally with a one-year warranty period from Wake Industrial.