Product Description

The DKR04.1-W400N-BE33-01-FW is a drive controller manufactured by Rexroth Indramat. The cooling mode for this drive controller is air or built-in blower. The rated current is 400. The drive controller is standard and therefore has not bleeder. There is digital servo and resolver feedback. In terms of command communication, the DKR04.1-W400N-BE33-01-FW has a SERCOS interface. The function numeric code is 33 and the version function numeric code is 01. Firmware for this drive controller must be ordered and this as a separate subposition. 

As far as the technical data for the DKR04.1-W400N-BE33-01-FW, the control voltage is AC 230 V, ± 10%, and the control power is 300VA. The continuous current of the drive is 210A for 4 kHz and 150A for 8 kHz. The drive reaches its peak current at 282A. The total heat dissipated at the continuous current of the drive is 2,500W. The heat dissipation in an air channel of with coolant at the continuous current of the drive is 1,800W. The DKR04.1-W400N-BE33-01-FW drive has an approximate weight of 150kg, while the accessories kit alone weights 1.7kg.

The DKR04.1-W400N-BE33-01-FW from Rexroth Indramat can be used at ambient temperatures of +5° to +45° C. the installation elevation should be between 0 to 1000m above sea level. Using the drive at different conditions may still be possible, but the load capacity must be considered as this reduces the power data. The maximum ambient temperature allowable is +55 °C and the maximum installation elevation is 5000 m above sea level. Using the drive controller under other conditions than the ones stated may lead to their damage. Overloading the drive controller can also lead to damage. This unit can be shipped globally with a one-year warranty period from Wake Industrial.