Product Description

The DKR03.1-W200Z-BE27-01-FW is a Bosch Rexroth drive controller from DKR line. This controller digitally drives Rexroth Indramat motors used in large scale printers and other applications. This controller can be easily configured for a particular application using special plug-in modules. These are officially called command interface cards and go in from slot U1 to U5. For proper installation instructions of this controller, please refer to the manual provided along with it. This controller has a protection rating of class IP 20. We ship this drive controller along with its accessories to all over the world.

To avoid deration of nominal data install the DKR03.1-W200Z-BE27-01-FW at an altitude of not more than 1000 metres above sea level. Also operate it between 5 degree C to 45 degree C only. This unit has a line code of 03 among the DKR variants. It features a SERCOS interface. The other option is analogue which is not available in this model. While making cable connections in this unit, take extra care to not make any wrong or unclean connections. Making wrong or improper connection can make the drive go through dangerous movements. These can surface at any point during the operation of the drive.

Add an emergency circuit breaker, while installing the product and connecting it to power. This will protect the unit from starting up in an unplanned manner. When cleaning, maintaining, or repairing the drive controller disconnect the power supply by using a mains switch. Peak current for this controller is 141A. For dissipating heat the unit has a conducting channel through which air is blown by a fan inside it. After switching the drive off, allow it to cool for 10 minutes before handling it.This unit can be shipped globally with a one-year warranty period from Wake Industrial.