Product Description

The servo drive controller DKR03.1-W200N-BE24-02-FW is manufactured by the well-known Bosch Rexroth. The drive controller is typically designed for operating and monitoring electrical motor operations. The DKR03.1-W200N-BE24-02-FW is optimally used for operating most NC machines, printing machines, and other compatible machines with a load voltage of 50 Volts or less.

Follow safety regulations and make sure that the operation and monitoring of the drive controller and machines are handled by professionally trained personnel. Always make sure that all accessories and parts are compatible with the DKR03.1-W200N-BE24-02-FW and authorized by Bosch Rexroth, to avoid any faults or damage to the machines or the drive controller.

Follow the safety instructions thoroughly before the process of installation and during the operation of the drive controller to reduce personnel injuries or property damage.

Make sure that the installation of the drive controller was similar to the relevant documentation.

The DKR03.1-W200N-BE24-02-FW drive controller from Rexroth is manufactured with a rated power voltage from 400 and 480 Volts AC, and with a 10% error margin that you should consider. The control voltage of the drive controller is 230 Volt with a 10% error margin to consider. The system frequency of the drive controller is in the range between 50 to 60 Hertz. The drive controller can handle a control voltage frequency between 50 to 60 Hertz as well. The power voltage ranges from 0 to 380 Volts. The peak current of the drive controller is 141 Amperes. The control voltage power is 200 Volt-Ampere. The DKR03.1-W200N-BE24-02-FW comes equipped with a blower cooling system to dissipate the heat to an 800 Watt. The DKR03.1-W200N-BE24-02-FW comes equipped with a built-in SERCOS interface for command communication. This unit can be shipped globally with a one-year warranty period from Wake Industrial.