Product Description

The Rexroth Indramat DKR03.1-W200N-BE11-02-FW is a servo drive controller. The drive controller is designed to control and monitor electrical motor operations. The DKR03.1-W200N-BE11-02-FW is typically used for operating printing machines and various machines that shouldn’t exceed the load voltage of 50 Volts. Notice that the process of controlling and monitoring motors may require additional sensors and actuators. Only trained personnel should handle the operation of the driver controller to avoid any personnel injuries or property damage. 

To avoid any hazards when using the drive controller, don’t use accessories or parts that aren’t compatible with the drive controller. Make sure to allow the motor to be parametrized when starting it so that the controller can operate the motor properly. To check if the controller’s capacitors discharged successfully after usage, use test equipment to check so that you can reduce the risk of electric shock.

The DKR03.1-W200N-BE11-02-FW’s rated power voltage is between 400 and 480 Volts AC, with a 10% error margin. The system frequency that the drive controller handles is well between 50 to 60 Hertz at max. The control voltage frequency of the drive controller is 50 to 60 Hertz as well. The control voltage is 230 Volt with a 10% error margin. The control voltage power is 200 Volt-ampere. The peak current is 141 Amperes. The drive controller power voltage ranges from 0 to 380 Volts. The DKR03.1-W200N-BE11-02-FW comes with a built-in blower cooling system to dissipate the heat to 800 Watt. The drive controller weighs 49 kilograms. You can add an optional auxiliary brake resistor with max braking energy of 150 kilowatts. This unit can be shipped globally with a one-year warranty period from Wake Industrial.