Product Description

The DKR03.1-W100Z-BE37-01-FW is one of the Bosch Rexroth drive controllers in the DKR series manufactured to be used with Indramat motors be applied in printing machines, etc. The DKR03.1-W100Z-BE37-01-FW drive controller is a configured unit with inbuilt components and an additional firmware module, the controller's operating system. The system of one controller can be transferred to a replaced one. It has a rated current set at 100 A, a built-in air blower cooling method, and a digital servo and resolver feedback, which is used to send signals from the motor's drive and is smooth and quick.

The DKR03.1-W100Z-BE37-01-FW drive controller also features a SERCOS command interface card, which is used to pass error signals from the drive and allow the utilization of the fiber optic cables. The drive controller unit also features auxiliary plug-in modules. The modules have different features such as measuring systems to measure square-wave and sinusoidal signal outputs, modules with CLC link interface, bidirectional data exchange, and analog signal interface. The modules can even be used for toothed wheel encoders manufactured by Rexroth Indramat, systems with analog power signals, and single-turn encoder measuring systems.

This Indramat drive controller was designed to monitor and control electric motors and their operation. This may sometimes require additional sensors to the existing unit. The DKR03.1-W100Z-BE37-01-FW drive controller can only be used under a specific ambient temperature, installation elevation, and specified position. The ambient temperature is between 5 and 45 degrees Celsius while the installation elevation must be from 0 to 1000 m above sea level. If it is operated out of these conditions, it will become damaged, so to do so, one must adjust the load capacity. This unit can be shipped globally with a one-year warranty period from Wake Industrial.