Product Description

Manufactured for Rexroth Indramat, the DKR03.1-W100Z-BE12-01-FW is a drive controller that can be used for industrial machines, with a 100A rated current. The drive controller was manufactured to direct mains connection to an AC mains with 3xAC 400 V to 480 V. The drive controller features an stop shutdown device in cases of emergency and a built-in mains contactor. The mains also receives a supply of regenerated braking energy to allow for an emergency stop. The DKR03.1-W100Z-BE12-01-FW device can be ordered with a built-in brake resistor, although this is optional. This will be used to decelerate the drive in the case of a mains failure.

The DKR03.1-W100Z-BE12-01-FW drive controller is cooled with a built-in blower, while the motor feedback is a digital servo and resolver feedback. The digital servo and resolver feedback is used to send signals from the drive to the motor. It is six times as fast as a standard analog servo, which allows for quick and smooth response times. The drive controller must be stored in a particular temperature between -30 degrees Celsius and +85 degrees Celsius. It must also be stored in places that are dry and free of dust and shock. The DKR03.1-W100Z-BE12-01-FW drive controller is resistant to shock because of the built-in main contractor. The rectangular shock pulses are limited to 8,4 g for 5ms and 4,8 g for 10ms.

As for the command communication of the DKR03.1-W100Z-BE12-01-FW drive controller, it uses a SERCOS interface. For the firmware, it must be ordered as a separate sub position with the drive controller. The drive controller's numeric function code is 12, while the version function numeric code is set at 01. This unit can be shipped globally with a one-year warranty period from Wake Industrial.