DKR03.1-W100

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
Rexroth, Indramat, Bosch Drive Controller in the DKR Series. This Drive controller features a Air (built-in blower) Cooling Mode along with a Rated Current of 100 A.

DKR03.1-W100

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
Rexroth, Indramat, Bosch Drive Controller in the DKR Series. This Drive controller features a Air (built-in blower) Cooling Mode along with a Rated Current of 100 A.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Exchange
Call to find out about our exchange credit for your defective unit.
Sell Us Your Surplus
Have a DKR03.1-W100 to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

DKR03.1-W100 General Information


The DKR03.1-W100 Rexroth/Indramat drive controller is often used within manufacturing, service, or assembly line systems because of its high versatility, durability, and easy installation. Around the world, these drives are being used by both large and small companies, which is dependent upon DKR drives to reliably run and control their automation parts. This DKR03 drive runs on a 3xAC 400V to 480V rated power voltage. These drive have become an industry standard because of their rugged composition and favorable price. This drive does not have a full part number. This is considered to be a base model drive. For more information regarding this drive or any other drive, go to the DKR series to see the entire selection of DKR drives.

The DKR03.1-W100 has many power range designations. To start, this DKR03 drive has a 71amp peak current, a 4kHz 71amp and 8kHz 60amp continuous current, and a 200VA control voltage. Its heat dissipation is rated at 900watts and 600watts per heat dissipation channel. This drive has a 0V to 380V control voltage and a 50 to 60Hz system and control voltage frequency. This drive does not include information pertaining to whether or not it has a bleeder, what type of motor feedback it has, what type of master communication card is installed, or what function code is integrated. For more information or to submit an RFQ for this DKR drive, contact us here at WakeIndustrial via phone or email.

Why buy from Wake Industrial?

If you want unrivaled customer service, a full time sales staff, and the lowest prices available, call us here at WakeIndustrial. We want to help fill your automation needs as quickly as possible, ensuring you waste no time. We are an industry leader in the sale of Rexroth/Indramat parts and products. If you want a reliable source for the purchase of automation parts, contact us via email or over the phone at any time.

DKR03.1-W100 FAQ


Question: What are some common communication modules this drive might have?
Answer: This drive could be equipped with an analog, SERCOS, Profibus, or Interbus interface.

Question: What slots do the auxiliary plug-in modules go into?
Answer: The auxiliary modules are inserted into the U2, U3, and U4 slots.

Question: Where is the firmware found?
Answer: The firmware is found and inserted at slot U5.

Question: Can the communication interface card go in any slot?
Answer: No, the communication interface card can only go into slot U1.

DKR for Explosion Proof - Operating Manual.pdf
DKR for Explosion Proof - Project Planning Manual.pdf
DKR Synchronous Drives.pdf
DKR Type Code Explanation.pdf

  • DKR 03.1-W100
  • DKR03.1.W100
  • DKR031W100
  • DKRO3.1-W1OO

DKR03.1-W100 Technical Specifications

Product Group: DKR
Version Function Numeric Code: Factory Assigned
Line: 03
Design: 1
Cooling Mode: Air (built-in blower)
Rated Current: 100 A
Bleeder: Factory Assigned
Motor Feedback: Factory Assigned
Command Communication: Factory Assigned
Function Numeric Code: Factory Assigned