DKR02.1-W300N-BA37-01-FW

  • Rated 4.6 (9 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911307011
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The DKR02.1-W300N-BA37-01-FW Drive Controller is manufactured by Rexroth Indramat Bosch. This drive controller operates with a rated current of 300 A, a Built-in Blower cooling mechanism, its command communication interface is ANALOG and it is Not Equipped with a bleeder.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

DKR02.1-W300N-BA37-01-FW

  • Rated 4.6 (9 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911307011
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The DKR02.1-W300N-BA37-01-FW Drive Controller is manufactured by Rexroth Indramat Bosch. This drive controller operates with a rated current of 300 A, a Built-in Blower cooling mechanism, its command communication interface is ANALOG and it is Not Equipped with a bleeder.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a DKR02.1-W300N-BA37-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The DKR02.1-W300N-BA37-01-FW drive controller made by Bosch Rexroth is used with different types of motors from this manufacturer. The controller helps in the digital controlling and monitoring of these motors. The usage of this product should be only as per the specifications to avoid personnel injury or damage to property. The hardware components of this device should not be tampered with or altered structurally. Its firmware is available as a distinct sub-item. The unit is not meant to be operated if there is extreme temperature fluctuation or a very high maximum temperature. This controller comes with a line code of 2. The product features 3 x 400 to 480 VAC +/-10% rated power voltage.

The device is likely to exhibit signs of high electrical voltage if the connections are done incorrectly. It may also depict dangerous movements due to one or more faults in the connected motor. These dangerous movements can take place at any point in time during operation. This unit is to be fitted only in commercial machinery. The installation of the product is done taking the general construction as well as safety regulations into consideration. It must be made sure that any work on the device is carried out only after five minutes of switching it OFF to ensure that there is no charge left in the capacitors.

The controller should always be connected firmly to the supply network. The motor and housing of this unit are to be grounded permanently before the power is switched ON. The product has a matching system and control voltage frequencies of 50Hz to 60Hz. It must not be operated if its emergency stop switch is defective or not working. The device is to be disconnected from electrical power using a master switch when it is kept unused for a long time. The DKR02.1-W300N-BA37-01-FW controller is available for international shipping with a warranty for one year.          

DKR02.1-W300N-BA37-01-FW Documents

  • DKR021W300NBA3701FW
  • DKR02 1 W300N BA37 01 FW
  • dkr02.1-w300n-ba37-01-fw
  • DKR2.1-W300N-BA37-01-FW

DKR02.1-W300N-BA37-01-FW Technical Specifications

Bleeder: Not Equipped
Command Communication: ANALOG
Cooling Mode: Built-in Blower
Rated Current (A): 300
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo