DKR02.1-W300B-BA03-01-FW

  • Rated 4.7 (9 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911294113
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The DKR02.1-W300B-BA03-01-FW Drive Controller is manufactured by Rexroth Indramat Bosch. This drive controller operates with a rated current of 300 A, a Built-in Blower cooling mechanism, its command communication interface is ANALOG and it is Equipped with a bleeder.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

DKR02.1-W300B-BA03-01-FW

  • Rated 4.7 (9 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911294113
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The DKR02.1-W300B-BA03-01-FW Drive Controller is manufactured by Rexroth Indramat Bosch. This drive controller operates with a rated current of 300 A, a Built-in Blower cooling mechanism, its command communication interface is ANALOG and it is Equipped with a bleeder.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a DKR02.1-W300B-BA03-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The DKR02.1-W300B-BA03-01-FW drive controller manufactured by Bosch Rexroth must be disconnected from electric power when it is kept unused for a long time or is being repaired. The housing of this product tends to become very hot during operation and can cause burns if touched. The device must not be pinched or crushed during handling and installation. It comes with a design code of 1. The unit should not be cut, opened or disassembled in a pressurized state. The controller helps in controlling AC main spindle, frameless spindle and linear motors which have a continuous power output of 10kW to 93kW at the output shaft.

The product supports a wide speed range with steady power and a high level of control. This device is integrated with an emergency stop shutdown system and a mains contactor. The unit also encompasses a blower and a heatsink fitted on its housing. The blower helps in air circulation to keep the controller cool when it is in use. The product has a rated current of 300A. It features a basic unit on which various modules can be fitted in its five slots to suit a specific application. The fifth slot is reserved for the insertion of the software module.

The controller comprises three name plates to ensure that the drive is labeled clearly in its configured state. The device incorporates a system frequency of 50Hz to 60Hz. The configured unit should be bought with its appropriate firmware that is available as a separate subitem. This firmware is selected based on the features and selected configuration of the product. The drive controller implements an analog interface for command communication. The brake resistor in the product absorbs the generated energy due to braking action when there is a mains failure. The device is shipped to the desired address through a reputed vendor network with a one-year warranty.

DKR02.1-W300B-BA03-01-FW Documents

  • DKR021W300BBA0301FW
  • DKR02 1 W300B BA03 01 FW
  • dkr02.1-w300b-ba03-01-fw
  • DKR2.1-W300B-BA03-01-FW

DKR02.1-W300B-BA03-01-FW Technical Specifications

Bleeder: Equipped
Command Communication: ANALOG
Cooling Mode: Built-in Blower
Rated Current (A): 300
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo