DKR 3.1-W200Z-BE32-00

  • Rated 4.5 (32 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911262424
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The DKR 3.1-W200Z-BE32-00 Drive Controller is manufactured by Rexroth Indramat Bosch. This drive controller operates with a rated current of 200 A, a Built-in Blower cooling mechanism, its command communication interface is SERCOS and its bleeder control is Undefined.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

DKR 3.1-W200Z-BE32-00

  • Rated 4.5 (32 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911262424
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The DKR 3.1-W200Z-BE32-00 Drive Controller is manufactured by Rexroth Indramat Bosch. This drive controller operates with a rated current of 200 A, a Built-in Blower cooling mechanism, its command communication interface is SERCOS and its bleeder control is Undefined.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Repairs
Sell Us Your Surplus
Have a DKR 3.1-W200Z-BE32-00 to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The DKR 3.1-W200Z-BE32-00 drive controller from Bosch Rexroth is one of the several DKR products from the manufacturer. This drive controller must be used properly to avoid property damage or bodily injury. The hardware components of the product should not be altered structurally. The device has a rated power voltage of 3 x 400 to 480VAC +/-10%. It is used to control and monitor the operation of electric motors. The unit may require additional sensors and actuators for this controlling and monitoring task. The controller must always be used with the parts and accessories provided or approved by the manufacturer.

The drive controller must be parameterized when it is started for the associated motor to perform the application-specific functions. This product should not be put to use if the operating and ambient conditions do not match. The device must always be installed, used, and serviced after reading the related documentation. It is likely to have a high discharge current and high voltage that can cause electric shock if used inappropriately. The operation of this unit is intended to be done only by qualified and trained personnel.

The controller is designed to be fitted inside a control cabinet that is in compliance with DIN VDE 0160 specifications. The product may get damaged if it is overloaded or operated outside ambient conditions. The device has an 8.4g resistance to shock for 5ms because of the inbuilt main contactor. It dissipates energy in the form of heat during operation. The amount of energy dissipated is dependent on the load. The unit has a maximum pressure of 160pa. The air inlets and outlets of the product must be sufficiently large to avoid overheating. This drive controller can be sent to you in custom military-grade foam packaging with a one-year warranty from Wake Industrial.  

DKR 3.1-W200Z-BE32-00 Documents

  • DKR 31W200ZBE3200
  • DKR 3 1 W200Z BE32 00
  • dkr 3.1-w200z-be32-00

DKR 3.1-W200Z-BE32-00 Technical Specifications

Bleeder: Undefined
Command Communication: SERCOS
Cooling Mode: Built-in Blower
Rated Current (A): 200
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo