Product Description

The DKR 3.1-W200N-BE23-00 is a DKR type application-specific drive controller manufactured by Bosch Rexroth. It is specifically designed for use with monitors and electric motors. The design of this controller allows it to be parameterized for specific functions prior to use. Its typical use cases are evident in NC machine tools and printing machines. The DKR 3.1-W200N-BE23-00 is only suitable for use under the allowable installation, assembly, position and ambient conditions.

The DKR 3.1-W200N-BE23-00 efficiently controls LSF/LAF linear motors, 1MB frameless motors and ADF or 2AD main spindle motors with continuous output power ranging between 10 to 93 kW. In general, DKR controllers come in a variety of power ratings to facilitate the precise regulation/control of these motor. When synchronized with the suitable drive, the DKR 3.1-W200N-BE23-00 confers high-level control and a broad range of speed on the drive. By design, this unit is meant to achieve the 3-phase connection of direct mains to grounded AC mains at 400 to 480 Volts.  It comes with an emergency shutdown device and an embedded mains contactor.

This model of the DKR drive controllers from Rexroth has a control voltage power rating of 200 VA and features a built-in air blower for cooling. The design of the DKR 3.1-W200N-BE23-00 is standard, and it does not come with a bleeder. In addition, this model weighs approximately 49 kilograms and features an Ingress Protection (IP) rating of 20. During installation, its maximum recommended height is 1000m m/sea level. All repairs and maintenance of electrical connections/parts on the DKR 3.1-W200N-BE23-00 must only be handled by qualified and trained personnel to avoid severe injuries, electrical shock and danger to life. This unit can be shipped globally with a one-year warranty period from Wake Industrial.