COVID-19 Update: Wake Industrial is open and available to support your automation needs.

Gregg was awesome and very helpful! Great Job!

~ Chad Thomas Excellent Ohio, USA

View All Reviews

DKC10.3-012-3-MGP-01V20

  • Rated 4.4 (9 total ratings)
  • MPN: R911331586
  • Call for Expedited Shipping and Product Condition Options
The DKC10.3-012-3-MGP-01V20 drive controller is manufactured by Bosch Rexroth Indramat. This version 3 unit operates with a 12A type current and its firmware is Multi-interface General Purpose.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

DKC10.3-012-3-MGP-01V20

  • Rated 4.4 (9 total ratings)
  • MPN: R911331586
  • Call for Expedited Shipping and Product Condition Options
The DKC10.3-012-3-MGP-01V20 drive controller is manufactured by Bosch Rexroth Indramat. This version 3 unit operates with a 12A type current and its firmware is Multi-interface General Purpose.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a DKC10.3-012-3-MGP-01V20 to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The DKC10.3-012-3-MGP-01V20 is a drive controller manufactured by Rexroth Indramat. It offers both single and multiple axes control to industrial automation systems. In the industrial servo system, the DKC10.3-012-3-MGP-01V20 drive controller can generate a continuous power of 48.9 watts from the servo motors. The housing of the servo drive meets the IP20 protection class; it can protect the drive from solid materials greater than 12 millimeters in diameter; the drive should, however, not be operated in ambient conditions with high alkaline acidic or metallic concentration as these can damage the power circuit of the drive. The DKC10.3-012-3-MGP-01V20 drive controller works with a rated current of 12 Amperes and a DC bus nominal bus voltage of 300 volts.

The DKC10.3-012-3-MGP-01V20 drive controller can be connected to the mains electricity either through a single or three-phase electrical connection. The drive controller works with a carrier frequency of 4 and 8 kilohertz. The drive controller's continuous output current is 2.5Amperes, while the maximum output current is 7.5 Amperes. The drive controller also provides effective control for the holding brake used during motor deceleration. The output frequency of the drive controller range from 0 to 333.3 hertz.

The DKC10.3-012-3-MGP-01V20 drive controller is integrated with a 01 firmware module version; this firmware module contains programming instructions that control the drive's activities. The drive also uses an input-output card, which acquires digital and analogical information from the PC, and stores information on motor positions. The electrical cables connected to the DKC10.3-012-3-MGP-01V20 drive controller generate electromagnetic waves during operation; thus, persons wearing devices sensitive to this wave should contact their doctors before operating the drive controller. The maximum leakage current generated in the drive controller during operation is 3 milliamperes. This unit can be shipped globally with a one-year warranty period from Wake Industrial.

  • DKC1030123MGP01V20
  • DKC10 3 012 3 MGP 01V20
  • dkc10.3-012-3-mgp-01v20

DKC10.3-012-3-MGP-01V20 Technical Specifications

Firmware Type: Multi-interface General Purpose
Type Current: 12A
Version: 3