DKC06.3-016-7-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
DKC Series AC Servo Amplifier Drive Controller manufactured by Indramat, Bosch, Rexroth. This Drive features a Voltage Rating of DC 700V along with a Series number of 6.

DKC06.3-016-7-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
DKC Series AC Servo Amplifier Drive Controller manufactured by Indramat, Bosch, Rexroth. This Drive features a Voltage Rating of DC 700V along with a Series number of 6.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Exchange
Call to find out about our exchange credit for your defective unit.
Sell Us Your Surplus
Have a DKC06.3-016-7-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The ECODRIVE03 is an optimized drive system which comprises of many components—with a DKC drive controller as its main servo-drive. This drive system and its embedded DKC drive controller is designed and manufactured by the Rexroth Indramat manufacturing group, and is typically applied in assembly systems, packaging systems, handling systems, etc.

The DKC06.3-016-7-FW is a DKC servo controller which is integrable in the ECODRIVE03 series, since it is a 3rd version drive in its series. Also based on its type code, the DKC06.3-016-7-FW is a series 6 DKC controller with a current rating of 16A. Due to its series type, it has the following interfaces for its connectivity: an analog interface, a DeviceNet interface and the RS232/RS485 interface. The DeviceNet interface is accessible on this drive via the X60 port (male, 5 pins), and it has a maximum bus voltage of 30V.

The DKC06.3-016-7-FW is classified for a voltage category of 7, and it requires a firmware module to be ordered separately with intended specifications for I/O characteristics. Generally, the ECODRIVE03 supports multi-axis motion and combination of multiple DKC drive; the DKC06.3-016-7-FW is also well suited for this kind of synchronization. For electrical parameters, the drive mains require AC voltage in either single or 3-phase connections. This connection could be via a single source supply, group supply without DC bus connection, or central supply. While this servo-drive generates a considerably reduced current, as compared with many other drives within its series, it is well optimized for low-power servo motors that require current inputs within that range. As is common with DKC drives, the DKC06.3-016-7-FW supports encoder inputs and outputs for up to two separate encoders at a time. Depending on the intended application, multiple encoders could improve automation accuracy via a strict closed loop control policy.

  • DKC 06.3-016-7-FW
  • DKC06-3-016-7-FW
  • DKC06.3-016-7
  • DKC06.3-016-7FW
  • DKC0630167FW
  • DKC6.3-016-7-FW
  • DKCO6.3-016-7-FW

DKC06.3-016-7-FW Technical Specifications

Servo Amplifier Drive Controller Unit: DKC
Current Type:
Series: 06
Version: 3
Current Type: 16A
Voltage Rating: DC 700V
Firmware : Standard
Firmware Version: Factory Assigned
Nature of Firmware: Factory Assigned