DKC04.3-100-7-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
DKC Series AC Servo Amplifier Drive Controller manufactured by Indramat, Bosch, Rexroth. This Drive features a Voltage Rating of DC 700V along with a Series number of 4.

DKC04.3-100-7-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
DKC Series AC Servo Amplifier Drive Controller manufactured by Indramat, Bosch, Rexroth. This Drive features a Voltage Rating of DC 700V along with a Series number of 4.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Exchange
Call to find out about our exchange credit for your defective unit.
Sell Us Your Surplus
Have a DKC04.3-100-7-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

DKC04.3-100-7-FW


DKC04.3-100-7-FW is a servo drive manufactured by Rexroth Bosch Indramat. This device is a part of the DKC family of servo drive controllers. This drive is known as an Ecodrive type 3 or Ecodrive03 device. This Ecodrive03 is a series 04 drive. Equipped with standard firmware, it also has an appearance similar to the DDS series of drive controllers, but is different internally.

The nominal DC voltage rating for the DKC04.3-100-7-FW is 700 V, while it has a current rating of 100 A. The input voltage is around 24 V. To protect the device from entry of dust, it is shielded according to IP20 standards. It does not have water resistance. The optimal temperature range for operation is 5 degrees Celsius to 45 degrees Celsius. The device can still operate up to temperatures of 55 degrees Celsius, but at a reduced efficiency. When storing the drive it must have a temperature between -35 degrees Celsius and 85 degrees Celsius. The altitude setup height of the device should be less than 1000m and no higher than 2000m.

In terms of features, the DKC04.3-100-7-FW provides many functionalities that are normally found on more expensive models. Even being competitively priced, this drive controller does not skimp on quality. It is compatible with many different kinds of single-axis or multi-axis motors from Indramat. Add-on sensors and actors can enable new functionality and compatibility with other devices. The drive controller uses Profibus-DP for its communications method. To make the device fit the users needs perfectly, it should be programmed before installation and use.

Why buy from Wake Industrial?

Here at WakeIndustrial, we supply our customers with the best depth of information making your buying decision easier. We understand the complexity of automation parts, thats why we always provide a thorough specification list and factory produced manuals for all of our products.

  • DKC 04.3-100-7-FW
  • DKC04-3-100-7-FW
  • DKC04.3-100-7
  • DKC04.3-100-7FW
  • DKC0431007FW
  • DKC4.3-100-7-FW
  • DKCO4.3-100-7-FW

DKC04.3-100-7-FW Technical Specifications

Servo Amplifier Drive Controller Unit DKC
Series 04
Version 3
Current Type 100A
Voltage Rating DC 700V
Firmware Standard
Firmware Version Factory Assigned
Nature of Firmware Factory Assigned