DKC04.3-040-7-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
DKC Series AC Servo Amplifier Drive Controller manufactured by Indramat, Bosch, Rexroth. This Drive features a Voltage Rating of DC 700V along with a Series number of 4.

DKC04.3-040-7-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
DKC Series AC Servo Amplifier Drive Controller manufactured by Indramat, Bosch, Rexroth. This Drive features a Voltage Rating of DC 700V along with a Series number of 4.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Exchange
Call to find out about our exchange credit for your defective unit.
Sell Us Your Surplus
Have a DKC04.3-040-7-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

DKC04.3-040-7-FW


The DKC04.3-040-7-FW is a servo drive controller that belongs to the DKC family of drive controllers from company Rexroth Indramat. This specific controller is an Ecodrive03 device and is able to be used in a variety of diverse automation systems. The DKC04.3-040-7-FW is a series 04 version 3 device.

One of the main reasons to consider the DKC04.3-040-7-FW is its diverse feature set, impressive quality and affordable price point. Single-axis and multi-axis motors are the two types that can be used with this drive controller. For some specific models, add-on actors and sensors may be necessary to enable full functionality. For field bus communications the device uses one of the industry standards, Profibus-DP. The servo drive should be programmed before installation and first time use so application requirements are set.

The Rexroth Indramat DKC04.3-040-7-FW has a nominal voltage rating of 700V. The current rating is 40A. The device also features IP20 protection from dust ingress. However, it does not have any shielding from water penetration. The device will run optimally if the temperature is within 5 degrees Celsius and 45 degrees Celsius. It can still operate at up to 55 degrees Celsius with reduced efficiency. The storage temperature is anywhere between -35 degrees Celsius and 85 degrees Celsius. The device has a maximum setup altitude of 2000m but ideally, the installation altitude should be less than 1000m for maximum output.

Why buy from Wake Industrial?

WakeIndustrial is an industry leader in the sale of DKC drives and automation parts. We promise to provide you, our customer, with the fastest and most reliable responses and information to any of your questions. Please contact us if you have any questions regarding a DKC drive.

DKC04.3-040-7-FM FAQ


Question: What type of interface do DKC drives use for setup?
Answer: DKC drives use RS-232/485 serial interface for setup, installation, and diagnostic.

Question: Is the UL listing on this model DKC?
Answer: The UL listing is on all DKC models.

Question: What can DKC drives control?
Answer: They can control all digital control of position, velocity, and current.

Question: How many components are needed for a basic ECODrive system?
Answer: Typically, a basic system needs only a DKC drive and AC servomotor, two interconnecting cables, input connections from the controller, an AC line, and 24VDC power.

DKC for Explosion Proof - Operating Manual.pdf
DKC for Explosion Proof - Project Planning Manual.pdf
DKC Synchronous Motors.pdf
DKC Type Code Explanation.pdf

  • DKC 04.3-040-7-FW
  • DKC04-3-040-7-FW
  • DKC04.3-040-7
  • DKC04.3-040-7FW
  • DKC0430407FW
  • DKC4.3-040-7-FW
  • DKCO4.3-040-7-FW

DKC04.3-040-7-FW Technical Specifications

Servo Amplifier Drive Controller Unit DKC
Series 04
Version 3
Current Type 40A
Voltage Rating DC 700V
Firmware Standard
Firmware Version Factory Assigned
Nature of Firmware Factory Assigned