Product Description

Bosch Rexroth is known for its reliability in the international market. The company manufactures drive controllers, brake resistors, and a wide range of industrial automation equipment.

The DKC04.3-004-3-MGP-01VRS model represents the latest motion control technology of Rexroth Indramat. The model belongs to the family of an EcoDrive Cs drive system and it should only be operated in conjunction with the power supply module and motor specified by the supplier. The DKC04.3 drive controller is designed to make connections with both single-phase and three-phase supply voltage. The model operating at the mains input voltage of 3 × 200 – 240 VAC, consumes the nominal continuous current of 0.7 A whereas, the model operating at the single-phase AC 200 – 240 V power supply consumes the nominal continuous current of 1.1 A. The rated current requirement of the unit is 4 A. The DKC04.3 drive controller can operate at the switching frequency of 8 kHz and it dissipates the continuous power of 24.7 W. The model supplies the continuous output current of 1 A, and it is used to drive a 100 Watts MSM synchronous motor. The model should only be used under the climatic and mounting conditions prescribed in the user manual.

The model DKC04.3-004-3-MGP-01VRS is protected under the IP20 protection category and it must be mounted in the switch cabinet of minimum IP54 ingress protection. The nominal voltage of 300 VDC is supplied to the model via an external power supply unit. The continuous power of the dc bus is 140 W. A multi interface general purpose firmware is installed in this unit. The drive controller is equipped with an RS232/RS485 interface, analog interface, and InterBus interface for developing effective communication. The ideal operating temperature range for DKC04.3 is 0 to +40 degree Celsius. Order this product today from Wake Industrial and get it along with a one-year product replacement warranty.