The DKC01.3-008-3-MGP-01VRS resides as part of the DKC series of drives manufactured by Bosch Rexroth. A worthwhile investment, the DKC01.3-008-3-MGP-01VRS is a cost effective and practical solution for both single axis automation and multiple axis automation projects. One of the most important components of a DKC drive is the firmware. Firmware enables a drive to be compatible with specific motors and allows for unique features. This drive uses MGP-01VRS firmware. On first use, the drive controller must be programmed before the controller is initialized. The drive can be programmed with individual parameters by using the DriveTop software.
While being part of the DKC series, the DKC01.3-008-3-MGP-01VRS is also referred to as an EcoDrive Cs Drive. EcoDrive Cs are an advanced generation of AC servo drives. These drives offer a reduced power range going from 100 to 750 W.
The EcoDrive Cs models are comprised of an 4 A version, used for 100 watt motors, an 8 A version, for 200 watt motors, a 12 A version for 400 watt motors and the 18 A model which is used for 750 watt motors.
DKC series of drives are commonly used in packaging machines, handling systems, assembly lines, printing operations and machine tools. The DKC01.3-008-3-MGP-01VRS is a line 1 design 3 drive. The current type rating of this drive is 4 A. The DC-bus voltage of this drive is DC 300 V. The firmware of the drive is classified as multi interface general purpose. The version of this firmware is 01.
|Servo Amplifier Drive Controller Unit:||DKC|
|Voltage Rating:||DC 300V|
|Firmware :||Multi interface, general purpose|
|Nature of Firmware:||Standard|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved