DDS03.2-W015-BE41-01-FW

  • Rated 4.6 (8 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911266775
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The DDS03.2-W015-BE41-01-FW Servo Drive is manufactured by Bosch Rexorth Indramat. The drive operates with Internal Cooling, 15 A rated current, and Digital Servo and Resolver Feedback.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

DDS03.2-W015-BE41-01-FW

  • Rated 4.6 (8 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911266775
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The DDS03.2-W015-BE41-01-FW Servo Drive is manufactured by Bosch Rexorth Indramat. The drive operates with Internal Cooling, 15 A rated current, and Digital Servo and Resolver Feedback.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a DDS03.2-W015-BE41-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The Bosch Rexroth DDS03.2-W015-BE41-01-FW is a DDS series digital controller. It is a modular device with a slot-based architecture. Operators can select hardware and software to adapt the controller to their requirements. A wide of plug in modules is available for DDS controller. Different firmware version are also available for the controller. Operators need to order the firmware for the DDS03.2-W015-BE41-01-FW as a separate subposition. The installed firmware and drive parameters reside in a software module. The software module installs in Slot U5 of the controller basic unit. The information listed on the firmware type plate allows identification of the exact firmware version on the unit. A hardware type plate is also attached to the controller. It lists information such as the serial type number, type code and other technical specifications. 

Operators need to verify the information on the type plates at the time of equipment delivery. Any damaged equipment should not be installed or operated. The specified ambient temperature for unused DDS controllers is -30 to 85 degrees Celsius. The specified ambient temperature for working DDS controllers is 0 to 45 degrees Celsius. The specified maximum temperature for operation with derated data is 55 degrees Celsius. Rated output of the DDS03.2-W015-BE41-01-FW is 15 Amps. The controller supports a command module with SERCOS interface. Motor feedback methods supported by the DDS03.2-W015-BE41-01-FW are digital servo feedback and resolver feedback. The DDS03.2-W015-BE41-01-FW controller dissipates heat inside the control cabinet. For this reason, operators can use large cabinets or air conditioning. DDS controllers with a heat sink that dissipate heat outside the cabinet are also available. Weight of the DDS03.2-W015-BE41-01-FW is 5.5 kilograms. Its ingress protection rating is IP20.

DDS03.2-W015-BE41-01-FW Documents

  • DDS032W015BE4101FW
  • DDS03 2 W015 BE41 01 FW
  • dds03.2-w015-be41-01-fw
  • DDS3.2-W015-BE41-01-FW

DDS03.2-W015-BE41-01-FW Technical Specifications

Cooling: Internal Cooling
Motor Feedback: Digital Servo and Resolver Feedback
Rated Current: 15 A
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo