DDS03.2 series drive with external DC 24V connection. RS-232 interface connection is implemented by PC or VT-100 terminal. The weight of the drive controller using heat technology is approx. 5.5 kg. They are able to pass 15A maximum and continuous current through its system. Their DC bus voltage is 300V. They are equipped with Integral Dynamic and Holding Brake functions as well as Power Shut-off Protection. This is for faults like out of range temperatures, electric voltage disruption, etc.
DDS03.2-W015-BE12-01-FW systems are workable and maintained under certain temperatures and the ambient storage temperature is -30 to 85 ºC. This connector is not needed, in case you are using ready-made feedback cable. Line 03 and Version 1 is being used in DDS03.2 series.
Thiscontroller must be kept with care, as you should not apply any load on it, do not tip, drop water or touch with the hands while the system is working. The Configured drive controller by Bosch Rexroth is known for its safety. These are Modular designed controllers. The Analog signals are passed through shielded lead cables having their connection to controller.
The firmware fixes the functionalities of drive controller and is programmed in software-plugin units. And it must be ordered separately for DDS03.2-W015-BE12-01-FW. The firmware is continuously gets updated, adhering the same updated functions but this can be identified by the type codes of firmware release. If new functions are added, then the index number of firmware increases.
The Air control cabinet is internally installed in this technology. The motor feedback with given via DSF-Digital Servo Feedback and RSF-Resolver Servo Feedback units and system uses SERCOS interface for its cross communication. The ‘12’ denotes function id and 01 indicates version of function id.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved