Product Description

The DDS03.1-W030-DL01-01-FW drive controller from Bosch Rexroth works along with a synchronous motor or an inductance motor. The DIAX03 controller has a modular design. This product is a good choice for robotics-related applications. The device is connected to the motor by using a power cable and a feedback cable. The unit must be operated with only a regulated 24VDC supply voltage. It can cause bodily injury or property damage if it is used inappropriately. This controller has to be used and maintained only by skilled and trained personnel. The product is designed such that it has to be mounted inside a control cabinet.

This device belongs to the DDS product group of such offerings. The unit installation must be done only in commercial machinery. Its earth wire must be inspected for permanent connection as per the connection diagram after installation. The controller is highlighted by a hot housing surface during and soon after operation. The product has chances of moving dangerously due to an incorrect velocity command. The device is intended to be in standstill mode before accessing the danger zone. The unit handling should be done only after wearing suitable protective clothing. This DDS03.1-W030-DL01-01-FW controller comes with a one-year warranty period.

The product has both firmware and hardware in its configured state. The basic unit of the drive controller can be adapted to various functions with the help of different modules. The device has a dedicated slot for its software module. It is used with a motor that is associated with digital servo feedback. The controller features a function ID code of 01. This product is cooled by heat technology. The device must be installed only vertically. The unit can function at a maximum ambient temperature of 55°C with derated data. It is possible to dispatch the drive controller to any destination of your preference.