Product Description

Bosch Rexroth is dedicated to service quality and produces top-notch products like drive controllers, drive converters, inverter modules, power supply modules, brake choppers, brake resistors, and frequency converters.

The DDS02.2-W200-BE96-01-FW model's unique module arrangement makes it suitable for a wide range of driving applications. In normal cases, software modules will contain driving instructions, drive settings, and any necessary firmware; however, the firmware for this model must be bought separately. The majority of the DDS02.2 drive controller's energy loss is dispersed outdoors, preventing it from accumulating inside the control cabinet. The model is certified IP20 and has a maximum acceptable relative humidity of 25 g/m3 and a maximum permissible humidity of 95%. This kind of motor drive controller enables precise control over the speed and direction of the motor, which is one of its key advantages. This allows you to easily set and maintain certain speeds, as well as change the rotating orientation as needed. The DDS02.2 drive converter weighs 7.5 kilograms and works with a 15 percent tolerance at 300-volt direct current bus voltage. The SERCOS interface is the primary communication module of the drive controller.

The model DDS02.2-W200-BE96-01-FW is rated for a steady current of 65 amps and a peak current of 200 amps. The model is fitted with air conditioning and a digital servo and resolver feedback for monitoring the speed and position of the motor. The drive controller has a storage and transmission temperature range of -30 to +85 degrees Celsius and can function at a maximum temperature of 45 degrees Celsius without losing data. This item (DDS02.2-W200-BE96-01-FW) is covered by a one-year replacement warranty and will be sent to you promptly by Wake Industrial.