Product Description

The DDS02.2-W200-BE34-02-FW is a modular industrial controller designed by Rexroth Indramat to improve the efficiency of industrial machines by carrying out the accurate control of electrical motors used to supply industrial machines with the kinetic energy they require for operation. This controller is manufactured according to the American and European quality standards; it features a modular design that makes it possible for industrial operators to integrate configuration modules into its housing unit easily; this modular design also makes the repair of the industrial drive controller possible without the need for the reconfiguration of the whole servo system. The DDS02.2-W200-BE34-02-FW industrial controller connects to industrial motors through the power cable and the motor feedback cable; these two cables must meet international standards to prevent electrical accidents when the motor is in operation.

The DDS02.2-W200-BE34-02-FW industrial motor is about 390 millimeters long and about 105 millimeters thick and also has a total weight of about 8 kilograms. During installation, this industrial controller should be installed with a minimum clearance of about 120 millimeters; this clearance allows for the easy movement of cool air in and out of the housing of the controller. The DDS02.2-W200-BE34-02-FW is self-diagnostic; it can independently detect and alert industrial operators of any error through the special light-emitting diodes integrated into the housing of the controller.

The permissible temperature range of this industrial controller during operation falls between 0 to about 40 degrees Celsius; however, during transportation, when the controller is not in use, it can be sored at an ambient temperature as high as 75 degrees Celsius. The maximum height at which the DDS02.2-W200-BE34-02-FW industrial controller should be installed is about 1000 degrees Celsius.