Product Description

Bosch Rexroth manufactures high-quality drive controllers, converters, inverters, and frequency converters. These components are employed in a broad variety of automation applications.

The DDS02.2-W200-BE14-01-FW model has both digital servo and resolver feedback and is relatively small in relation to its capabilities, weighing around 7.5 kilograms without accessories. Only those who are adequately qualified should be permitted to use this drive controller or its surroundings. As a protection, high-frequency, remote-control, and radio-frequency devices should not be operated in close proximity to the device's electronics or power source. This DDS02.2 drive controller includes pre-configured software and hardware needs. The software on the drive controller governs its operation, and it operates at a constant current of 65 A. This drive controller's primary job is to convert electrical energy to mechanical energy by adjusting the current flowing through the motor windings in response to changes in load conditions or user inputs. This is done via the use of power electronics circuitry that acts as a bridge between the alternating current source and the direct current needed by the motor windings. This DDS02.2 drive controller accepts inputs from a command communications module, various plugin modules, and a software module. The model firmware, which contains the module's operating software, must be purchased separately.

The model DDS02.2-W200-BE14-01-FW has a maximum current of 200 A and dissipates 560 Watts at 90 A continuous current. The model's extra modules may be inserted into the model's five accessible slots. Each of the U1–U5 slots may accommodate a unique mix of modules, depending on the application. When utilized in conjunction with the components and modules indicated for this module, the drive controller (DDS02.2-W200-BE14-01-FW) incorporates a quick action control system and a SERCOS interface communication module.