This company was fantastic to work with! Very patient with us to make sure we ...

~ Carla Morgan Excellent Kentucky, USA

View All Reviews

DDS02.2-W100-BE46-01-FW

  • Rated 4.9 (9 total ratings)
  • MPN: R911268719
  • Call for Expedited Shipping and Product Condition Options
The DDS02.2-W100-BE46-01-FW Servo Drive is manufactured by Bosch Rexorth Indramat. The drive operates with Internal Cooling, 100 A rated current, and Digital Servo and Resolver Feedback.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

DDS02.2-W100-BE46-01-FW

  • Rated 4.9 (9 total ratings)
  • MPN: R911268719
  • Call for Expedited Shipping and Product Condition Options
The DDS02.2-W100-BE46-01-FW Servo Drive is manufactured by Bosch Rexorth Indramat. The drive operates with Internal Cooling, 100 A rated current, and Digital Servo and Resolver Feedback.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a DDS02.2-W100-BE46-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The Bosch Rexroth DDS02.2-W100-BE46-01-FW drive controller is meant to be earthed before it is switched ON. This controller features maximum permissible absolute humidity of 25g/m3.  The product has to be worked on only after at least five minutes of powering it down so that the capacitors get discharged fully. The device may move dangerously due to faulty wiring or cabling, a software error or physical component problems. The unit is intended to be stated up only after ensuring that its emergency stop switch is in working condition. It should be in standstill mode before entering the danger zone. This controller must be installed using suitable installation equipment and tools.

This product should not be subject to pinching or crushing when it is being handled. The device has a 2 version code. The unit may require a large cabinet for its installation. Its firmware gets updated regularly for accurate functioning without affecting the functions. The drive controller uses a SERCOS interface for command communication. The product comes with a continuous current rating of 60A. The device must be put into operation only within the specified ambient conditions as far as possible. Its configuration rating plate has the term COVER mentioned on it when the corresponding slot has no plug-in module.

The drive controller features an energy loss that is based on the continuous current of the associated motor in standstill mode. The unit is not designed to be installed horizontally. It should encompass a clearance distance of at least 80mm at the top and bottom inside the control cabinet for the entry and exit of cool air and hot air respectively. The product is not to be utilized when there is extreme variation in temperature. The device transportation must be done using shock-absorbing transports if needed. This controller is available with a year’s Wake International warranty for global shipping.

DDS02.2-W100-BE46-01-FW Documents

  • DDS022W100BE4601FW
  • DDS02 2 W100 BE46 01 FW
  • dds02.2-w100-be46-01-fw

DDS02.2-W100-BE46-01-FW Technical Specifications

Cooling: Internal Cooling
Motor Feedback: Digital Servo and Resolver Feedback
Rated Current: 100 A