Product Description

The Bosch Rexroth DDS02.2-W100-BE14-02-FW is a DDS series industrial drive controller. It is compatible with a wide range of industrial motors from Bosch. The combination of the DDS controllers and a compatible motor is typically deployed for applications that include handling machines, robotics, textiles and printing machines. According to the type code for the DDS02.2-W100-BE14-02-FW drive the series is 2 and version is also 2. The function ID of drive is 14 and the function ID version is 02. The firmware for the DDS02.2-W100-BE14-02-FW is ordered separately. The reason for this is that Bosch develops multiple firmware that support different feature sets, and the ordered firmware should be the one that satisfies the customer requirements. The DDS02.2-W100-BE14-02-FW is a modular controller that is matched to customer requirements through selection of firmware and hardware.

The components of a complete DDS controller include the controller basic unit, firmware and optional hardware modules. Two hardware modules are mandatory for each DDS controller: these are the software module and a command communication module. The command module on the DDS02.2-W100-BE14-02-FW is SERCOS. The firmware and operating parameters for the drive are stored on the software module. A maximum of three optional plug modules can be installed on each DDS controller.  DDS controllers are designed for either heat technology or cold technology. The DDS02.2-W100-BE14-02-FW is designed for heat technology. It dissipates heat inside the cabinet. The working temperature range is 0 to 45 degrees Celsius. The rated controller output under recommended ambient conditions is 100 Amps. Controller operation under non-specified conditions leads to output derating. Any modification to the controller hardware or software is not permitted. Only approved accessories should be used with the controller.