Product Description

The Bosch Rexroth DDS02.2-W100-BE13-01-FW is a drive controller. It is designed for commercial and industrial applications. The controller is deployed with a servo motor. The DDS controller series is compatible with MBW inductance motors, ADF inductance motors, 2AD inductance motors, LAF linear inductance motors, MKD synchronous motors and motors several other product lines. Typical applications for drive systems comprised of DDS controllers and compatible motors include textiles, robotics and packaging machines. The DDS series controllers operate at 24 Volts DC input. However only power supplies that deliver regulated DC output should be used. Relevant safety instructions are listed in the product documentation and should be implemented during drive installation and operation. Disregarding safety instruction can lead to equipment failure and serious injury to working personnel. Proper transport, handling and installation are pre-requisites for safe operation of the controller.

Bosch only permits qualified personnel to work on the installation, operation and maintenance of the controller. Professional installation is the best method for minimizing installation errors that could affect controller performance. The DDS02.2-W100-BE13-01-FW is rated for 100 Amps output. The command module supplied with the controller is SERCOS. The controller comes with integrated support for resolver feedback and digital servo feedback. Therefore motors that support either of the feedback methods can be used with the controller. The DDS02.2-W100-BE13-01-FW is designed for heat technology i.e. heat is dissipated inside the control cabinet. DDS controllers designed for cold technology are also available. The firmware is a critical component of the controller setup. The firmware for the DDS02.2-W100-BE13-01-FW is ordered as a separate subposition. It is stored on the software module that can be easily moved to another drive if required.