Product Description

The DDS02.2-W100-BA07-01-FWdrive controller from Bosch Rexroth is used to control and monitor the operation of the manufacturer’s electric motor. The DIAX03 controller can be used with a wide range of synchronous, linear and inductance motors. The product acts as a rapid-response drive when used with one of these motors. The device belongs to the DDS product group of such offerings. The unit depicts a modular design that makes it possible to use multiple drive controllers with just one power supply. It has various plug-in modules that help to perform its functions. This controller can be connected to the associated motor using a power cable and a feedback cable.

This drive controller is meant to be connected to only a power supply with a regulated 24VDC voltage. The product may cause property damage or personnel injury or both if it is used inappropriately. The device commissioning action must be done using a service cable before it is started for the connected motor to perform the application-specific functions. The unit is meant to be mounted and installed only in vertical orientation. It exhibits derated performance when the ambient operating conditions are exceeded. The controller is associated with a one-year warranty tag.

The product features a connection to the motor feedback at its X4 connecting point. This device comes with an IP 20 degree of protection as per EN 60529 / DIN VDE 0470-1 specifications. The unit comprises anH1 LED status display on its front panel to highlight the errors and error messages. It is meant to be connected using only the manufacturer’s cables. The drive controller is connected to an adjacent controller using DC bus rails. This product has a ready-to-operate contact when the controller is ready to receive power. The device also implements a starting lockout mechanism. This DDS02.2-W100-BA07-01-FW controller can be sent globally anywhere across the world.