Product Description

The Bosch DDS02.2-W050-BE74-02-FW is an industrial drive controller. It is a digital device that is deployed for motor control. The input voltage rating of the controller is 24 Volts DC. However if can only be used with regulated power supplies. The output current rating of the DDS02.2-W050-BE74-02-FW is 50 Amps. As per the type code, the series for the controller is 2 and the version is 2. The function ID is 74 and the function ID version is 02. The firmware for the controller is ordered as a separate subposition. The firmware is stored on the software module with the drive parameters. The software module installs in slot U5 of the controller basic unit. A command communication module installs in slot U1 of the controller basic unit. The command module installed on the DDS02.2-W050-BE74-02-FW supports SERCOS.

Slots U2 through U4 are available for optional plug in modules. The plug in modules can be selected to match customer requirements. The list of available plug in modules includes analog signal interface, absolute encoder emulator, ARCnet coupler card, encoder interface for encoder with EnDat interface or SSI interface, incremental position interface, high-resolution positioning interface, and two types of gearwheel encoder interface. The DDS02.2-W050-BE74-02-FW is designed to dissipated heat inside the cabinet where it is installed. The recommended ambient temperature range for controller operation is 0 to 45 degrees Celsius. The output derates at temperatures between 45 and 55 degrees Celsius. Bosch does not allow use of the DDS02.2-W050-BE74-02-FW controller at temperatures that exceed 55 degrees Celsius.  The DDS02.2-W050-BE74-02-FW supports two motor feedback methods: resolver feedback and digital servo feedback. The DDS02.2-W050-BE74-02-FW should be handled and installed by trained professionals only.