Product Description

The DDS02.2-W050-BE34-01-FW drive controller manufactured by Bosch Rexroth has a control section and a power section. This controller has a line code of 2. The product must never be used with an unregulated power supply. The product may cause bodily injury, property damage or both if it is used inappropriately. The device has a weight of approximately 7.5kg. It should be installed inside a control cabinet. The unit supports an ambient operating temperature range of 0°C to 45°C with rated data. The plug-in components of the controller have to be stored and transported in special packing. The product should be put into operation only by personnel qualified and trained to work on it.

The device is meant to be installed only in commercial machinery. It must encompass protection against indirect contact as per DIN EN 50178 specifications. This unit depicts a discharge current of more than 3.5mA. The product features components and interfaces that have connections with signal voltages ranging from 5V to 30V. This device should not be made to function if its emergency stop switch is not working. It must neither be mounted nor installed if it has damaged or defective components. The unit handling and mounting actions are supposed to be done only after wearing suitable protective clothing if needed. This DDS02.2-W050-BE34-01-FW controller comes with one-year backup support.

The product comprises hardware as well as firmware when it is configured. The device incorporates a configuration plate that highlights the modules fitted in the controller. Its functions are determined by the firmware. The unit depicts a power section with a DC bus voltage of 300V +/-15%. The controller also has a current consumption of 150mA at +/-15V. This product does not have protection against the penetration of water. The device installation is meant to be done only in the vertical orientation. The drive controller is dispatched to its destination through reputed freight carriers.