Product Description

The DDS02.2-W015-BE95-02-FW drive controller from Bosch Rexroth is used with an AC motor from the same manufacturer. The DIAX03 controller, along with the motor, functions as a rapid response drive. This product is used to control and monitor the operation of the motor. The device belongs to the DDS product group of controllers. The unit incorporates a control section and a power section. It has a modular design that supports the connection of several drives to a single power supply. The drive controller may cause a risk of personnel injury or property damage if it is used improperly. The product installation is intended to be done in a control cabinet.

The controller has a line code of 2. This device must be installed taking the general safety and construction guidelines for electrical power installations into consideration. The unit portrays a high discharge current of more than 3.5mA. Its earth wire should always be connected before the startup to avoid high voltages on its housing. The drive controller tends to depict dangerous movements due to faulty control of the connected motor. This device has to be brought to standstill mode before accessing the danger zone. The DDS02.2-W015-BE95-02-FW controller has a one-year warranty.

The product comes with an IP 20 degree of protection as per EN 60529 specifications. The device installation and transport must be done using suitable tools and equipment. The unit comprises a software module, plug-in modules and firmware in its configured state. Its firmware has to be procured as a separate subitem. The controller makes use of heat technology for its cooling. This product needs a separate software module for each of its functions. The device has a configuration rating plate that helps in identifying the module in each slot. The unit is associated with a continuous current rating of 15A. This drive controller can be shipped to any global destination.