Product Description

The DDS02.2-W015-BE41-02-FW is an industrial controller that is manufactured by highly trained engineers of Rexroth Indramat under ideal environmental conditions. This controller is designed to represent an advancement over conventional industrial devices as it combines old motor control knowledge with new industrial designs to form a rapid response drive system that can meet the operational requirements of highly advanced industrial production and processing machines. This controller is manufactured according to the American and European quality standards; before delivery, it is tested and certified to operate exactly according to the instructions stated in its housing unit; it is also fitted with a type label that contains important identification information such as the type code, bar code, and serial number.

The DDS02.2-W015-BE41-02-FW industrial controller should only be connected to industrial motors that feature digital servo feedback to ensure optimum motor control. The controller needs this feedback to estimate the motor's current operational status and make necessary adjustments depending on the pre-determined operational parameters. Although this industrial drive controller is supplied as a fully configured unit, it is not supplied with a firmware module; it is the responsibility of the operator to specially order this firmware module as a separate sub-unit.

The rated input current required by the DDS02.2-W015-BE41-02-FW industrial drive controller is about 15 amperes; at this current, the controller uses a DC bus voltage of about 300 volts and can generate a leakage current of about 3.5 milliamperes. It is very important for the industrial operator to ensure that this controller is connected to an efficient grounding system before the operation as this will prevent electrical accidents that can be caused by the leakage current generated in the motor.