Product Description

The DDS02.2-A200-B is a servo drive in the DDS series from Bosch Rexroth. The drive generates an F233 error message if the voltage rating of the external power supply of the plug-in modules is more than the allowed limit. The product must be placed in the machine in which it is used only after the main switch of the machine has been turned OFF. The stud bolts at the top and bottom of the device must be tightened after it is connected. The transparent viewing panel that is removed during connection must be fixed back in place before the unit is restarted.

The mechanical and electrical connections to the servo drive should be removed on the top, the front and the underside. The unit makes use of resolver feedback, motor feedback and digital servo feedback. The product must be started only after ensuring that the machine in which it is installed complies with the EC 89/392/EWG machine directives. Multiple devices can be stacked together and used with a single or several power supplies. It has a current rating of 200A. The DDS02.2-A200-B can be shipped to any address through our reliable delivery team. It comes with a one-year warranty period.

The AC servo drive is a good choice for use in applications that make use of handling machines and robotics. The electrical connecting points of the product must not be touched when it is on. It has a high discharge current of more than 3.5A. The power connection to the unit can be isolated using a starting lockout or an emergency stop circuit for safety against unintended startups. There must be no radio, remote control or high-frequency equipment in operation near the supply line. This device does not encompass any plug-in modules. The servo drive makes use of the DIAX03 firmware from the manufacturer.