Product Description

The DDS02.2-A100-BE28-01-FW is a servo drive produced by Rexroth Indramat under ideal industrial conditions to control the operation of electrical motors by adjusting the current the motor receives to generate an intended motor output. This controller was designed to monitor and control the operation of industrial motors and rotary mains used in the servo system; it also features a durable housing unit that meets the IP20 protection class and effectively protects the internal components of the motor from large solid materials with an external diameter larger than 12 millimeters. The operation of this industrial control device is particularly easy however, only persons that have gone through the documentation of the controller and are familiar with Rexroth Indramat product should be allowed to handle the controller. The DDS02.2-A100-BE28-01-FW industrial controller also contains a high metal content which makes it easy to be recycled when its service life has been exhausted.

The DDS02.2-A100-BE28-01-FW industrial controller maintains a closed-loop control mechanism; this means it can independently compare the digital signal it receives from the motor with pre-determined configuration parameters and then corrects any deviation of the motor from these configuration instructions. The DDS02.2-A100-BE28-01-FW industrial drive controller is not supplied with a firmware module; this should be specially ordered by the industrial operators as a separate sub-unit. The modular housing design of this industrial motor also makes it possible for the operator to easily integrate the motor into any position in the servo system.

The DDS02.2-A100-BE28-01-FW industrial servo drive controller operates with a rated input current of about 100 amperes and a DC bus voltage of 300 volts. This controller is contains special light emmiting diodes which communicates the operational status of the controller to the operator in real time.