Product Description

The DDS02.2-A100-BE06-01-FW is a Bosch Rexroth DDS series digital drive controller. The series to which the unit belongs is 2 and the versions is also 2. The rated current output is 100 Amps. The DDS02.2-A100-BE06-01-F is designed with cold technology and dissipates heat outside the control cabinet. Therefore, the controller can be installed inside small cabinets or housings. The controller supports digital servo feedback and resolver feedback. The DDS02.2-A100-BE06-01-FW is compatible with a wide range of motors that include the MDD, MKD, LAR, LAF, LSF, 2AD, ADF, 1MB and MBW motor series. The command module installed on the DDS02.2-A100-BE06-01-FW supports SERCOS. This communication protocol uses fiber optic cables for network communication and supports 2 / 4 Mbps data rates. The nodes on the SERCOS network are arranged in a ring topology. This topology provides built-in redundancy.

The firmware for the DDS02.2-A100-BE06-01-FW is stored on a software module. The drive parameters are also stored on the software module. The DDS02.2-A100-BE06-01-FW is a modular controller that can be adapted to a wide range of customer applications. The basic unit of the controller has three slots for optional modules. The types of available modules include I/O modules, position modules, ARCNET modules and encoder modules. The DDS02.2-A100-BE06-01-FW can be used with DC supplies that provide regulated 24 Volts DC output. Controller operation with rated data requires 0 to 45 degrees Celsius ambient temperature, maximum 95% relative humidity and maximum 1000 meters altitude. Controller operation is not permitted at altitudes that exceed 5000 meters or at temperatures that exceed 55 degrees Celsius. The controller installation and operation should be performed by qualified personnel. Weight of the controller is 11 kilograms.