Product Description

The DDS02.1-W200-DS53-00-FW is one of the latest and most sophisticated productions of the reputable Rexroth Indramat; it is an industrial drive controller designed to improve the efficiency of industrial machines by carrying out the accurate control of synchronous and induction motors used in the industrial servo system. This electrical controller is designed by well-trained engineers under ideal manufacturing conditions; before delivery, it is tested and certified to operate according to international quality standards. Although this industrial drive controller is designed to be absolutely safe for industrial operation, operators should ensure it is properly configured and installed as the wrong handling of the controller can cause it to initiate a dangerous motor movement. The modular design of this drive controller also makes it possible for operators to replace a specific part of the device without carrying out the reconfiguration of the whole servo system.

The DDS02.1-W200-DS53-00-FW industrial controller is supplied as a fully configured unit made up of the software module, auxiliary plug-in module, and the basic unit. However, it is not supplied with the firmware module as it is the responsibility of the operator to make a special request for this module according to the requirements of the controller. The DDS02.1-W200-DS53-00-FW industrial controller keeps its internal temperature within a permissible range via forced ventilation; this temperature regulation process can be facilitated by the installation of the controller with a minimum clearance of about 120 millimeters

The DDS02.1-W200-DS53-00-FW industrial drive controller also operates with a rated input current of about 200 amperes and a DC input voltage of 300 volts. The permissible temperature range at which this industrial controller can be operated falls between 0 to about 40 degrees Celsius.