Product Description

The DDS02.1-W200-DS24-03-FW is a DDS series drive controller. It is compatible with multiple Bosch motor from the MDD, MKD, LAR and LAF product lines. DDS drives have modular hardware and software. The main hardware building block is a basic unit that has slots for mandatory and optional modules. The firmware can also be ordered with features that satisfy different requirements. Rated output of the DDS02.1-W200-DS24-03-FW is 200 Amps. The controller output derates if the ambient temperature is more than 45 degrees Celsius or if the installation site altitude is more than 1000 meters. The DDS02.1-W200-DS24-03-FW is designed for vertical mounting and measures 355 x 105 x 325 millimeters. The controller is a convection cooled device. Bosch has recommended the following spacing for proper heat dissipation: 80 millimeters on the top/bottom side, 40 millimeters on the left/right side and 22.5 millimeters on the rear side.

The DDS02.1-W200-DS24-03-FW dissipates heat inside the cabinet: the cool air enters at the bottom and exits at the top. Weight of the controller is approximately 7.5 kilograms. The DDS02.1-W200-DS24-03-FW supports digital servo feedback. The command communication module is SERCOS which supports 2 / 4 Mbps data rates over fiber optics. The nodes on a SERCOS network are connected in ring topology. The advantage of this topology is that communication is unaffected if a single fiber is cut or if a single node is disabled. The firmware for the DDS02.1-W200-DS24-03-FW is located on the software module. This module can be moved to another drive if required. Typical applications for DDS controllers include textiles, machine tools, packaging machinery and handling machines. The DDS02.1-W200-DS24-03-FW and associated equipment including motors must be professionally installed.